Call me
+86-576-84062066

Plastic Houseware Moulds

Through the production process of our company's Plastic Houseware Moulds, P20 can not only improve the life of the mold, but also increase the surface gloss of the products molded by the mold without flash/burr.
At present, domestic mold cavities are generally formed by EDM. The quality and quantity of electroforming molds are far from satisfactory in the context of modern production. The emergence of high-speed machining technology has brought mold manufacturing technology to a new level.
Before the mold is lubricated, the lubricated parts should be cleaned with clean cotton yarn to remove impurities such as iron foam. Then use a special tool to clean the cleaned sodium grease or ejector lubricant to avoid impurities in the lubrication area acting as abrasive sand to affect the accuracy of the mold. Lubricate a thin film of oil evenly, especially near the molding site. Use a cotton yarn to infiltrate the grease and apply a thin layer of sodium-based grease to prevent the extrusion of contaminated plastic parts.
Lubrication of the guide post and guide sleeve positioning lock surface should firstly clean the column and the sleeve positioning lock surface with cotton yarn, and then evenly apply a small amount of oil to the oil film with a small amount of clean grease.
The smooth appearance of Plastic Houseware Moulds depends mainly on the polishing. In order to obtain high-quality polishing results, polishing tools and auxiliary materials such as high-quality oil stone, sandpaper and diamond abrasive paste are required. Professional polishing staff handle it.
Mold maintenance is more important than mold maintenance. The more times the mold is repaired, the shorter the life is. The better the mold is maintained, the longer the service life will be. There are three main points in mold maintenance:
1. Daily maintenance: all kinds of moving parts such as thimble, row position, guide column, guide sleeve refueling, mold surface cleaning, water transporting the road, which is maintained every day when the mold is produced.
2. Regular maintenance: Regular maintenance, including daily maintenance, also requires the cleaning of the exhaust vents, trapping the black spots and exhausting, and repairing the damage and wear parts.
3. Appearance maintenance: paint on the outside of the mold blank to avoid rust. When the mold is used, the fixed mold should be coated with anti-rust oil. When the mold is stored, it should be closed tightly to prevent dust from entering the cavity.
Welcome to buy high quality plastic houseware moulds made in China from professional manufacturers and suppliers of plastic houseware moulds in China. For more information, contact our factory now.
  • Plastic Shoe Rack Moulds
    Contact Now

    Plastic Shoe Rack Moulds

    The Plastic Shoe Rack Moulds uses advanced software such as UG and AUTOCAD to optimize mold design through Moldflow, achieving excellent production conditions and product quality, ensuring high precision and high quality.
  • Plastic Kitchen Rack Moulds
    Contact Now

    Plastic Kitchen Rack Moulds

    The company has a complete Plastic Kitchen Rack Moulds design system that is responsible for researching forward-looking technologies and developing new products.
    For optimal design, advanced CAD / CAE / CAM technology and UG, CATIA, MOLD FLOW and PRO / E software help...
  • Plastic Fork Moulds
    Contact Now

    Plastic Fork Moulds

    For this Plastic Fork Moulds, our industry-leading technicians use UG, CATIA, MOLD FLOW and PRO / E software to perform a comprehensive design analysis of the mold structure and product structure, including draft angle, surface reduction, injection system design, design...
  • Plastic Knife Moulds
    Contact Now

    Plastic Knife Moulds

    Our Plastic Knife Moulds production center produces precision molds made from high quality materials.
    The execution of the mold adopts hot runner technology, and the imported steel is used internally, which has high surface brightness and long service life.
  • Plastic Food Storage Containers Muold
    Contact Now

    Plastic Food Storage Containers Muold

    Plastic Food Storage Containers Muold uses circulating water to flow in every part of the mold, reducing the cooling time during injection molding, improving product production efficiency and greatly reducing production costs.
    We also use Swedish 718 plastic die steel...
  • Plastic Dustbins Mould
    Contact Now

    Plastic Dustbins Mould

    For this plastic waste bin mold, we adhere to the "people-oriented, continuous innovation" concept, implement the principle of "pursuing excellence, manufacturing quality products", and follow tenants "pay attention to every detail."
    In order to make the cavity smooth,...
  • Plastic Cabinets Mould
    Contact Now

    Plastic Cabinets Mould

    As the details determine success or failure, for this Plastic Cabinets Mould, we try to control each program from drawing review to material preparation, from preliminary machining to finishing, from inspection and assembly to pilot production.
    We use high-quality P20...
  • Plastic Planters Mould
    Contact Now

    Plastic Planters Mould

    This Plastic Planters Mould is a new design and we have been trying to capture some of the market share.
    We have a complete mold design system for forward-looking technical research and new product development.
  • Plastic Stools Mould
    Contact Now

    Plastic Stools Mould

    The Plastic Stools Mould is cleverly designed.
    It features 718 pre-hardened die steel, which is stable and well polished, making it easy to achieve mirror finish.
    Its HRC hardness of 25-37 degrees or more, and high wear resistance, is the material of choice for...
  • Plastic Bucket Mould
    Contact Now

    Plastic Bucket Mould

    As this quality plastic bucket mold requires critical appearance and high surface brightness, it is of importance to choose materials. Generally, pre-hardened die steel such as P20/718 is the first choice to manufacture such product with fine look, which has stable...
  • Plastic Plate Moulds
    Contact Now

    Plastic Plate Moulds

    For this plastic plate, we choose P20 pre-hardened steel that is not suitable for heat treatment. Through quenched and tempered process in the middle term and then nitriding treatment, its hardness reaches 280~400 HRC. As being pre-hardened, it is not difficult to go through...
  • Kitchen Storage Containers Mould
    Contact Now

    Kitchen Storage Containers Mould

    For this plastic dish rack mold, our professional designers design the reasonable structure, aiming at minimizing the production cycle and reducing unnecessary procedures, so as to improve the productivity. With quality P20 die steel as raw material, we use advanced software...
First Prev 12 Next Last 1/2
Home | About Us | Product | News | Knowledge | Contact Us | Feedback | Mobile | XML
©Huangyan Giant Star Mould Factory
TEL: +86-576-84062066  FAX: +86-576-84062066  Email: juxing-b@juxingmould.com